Lliquid concrete waterproofing
Professional Manufacturer, Core Technology!
International First-class Quality, But Competitive Price!
Provide OEM Service!
We can provide:
01. OEM Service
02. Product Data Sheet.
04. Test Reports
05. Construction Guideline
06. Company Brochure
Goodcrete Deep Penetrating Sealer(DPS) is a silicate-based,
inorganic, penetrating and crystallization
waterproofing&protective agent forconcrete construction, it is environment friendly, colorless,
odorless, non-toxic, non-flammable, easy and safe to use.Beside durablewaterproof and anti-seepage functions, it also can give the
concrete construction comprehensive improvement andprotection, such as self-sealing, waterproofing, damp proofing,
cracking resisting, anti-corrosion, anti-efflorescence,
The inner alkali content of the concrete is about 360 times more
thanthe surface’s, through the pores, DPS penetrates into the concrete
structures, chemically reacts with the free alkalispresented in the concrete and forms silicate gel, which seals the
micro cracks and capillary pores becomes the integral partof the concrete, strengthens the concrete structure, and blocks the
harmful substances ingress; when water losses, it partlysolidifies into crystalline powder, let the concrete breathe
freely, when meets with moisture or water, this reaction repeatsagain, thus, gives the concrete permanent waterproofing and
protection, such as sealing, waterproofing, damp proofing,
anti-seepage,anti-corrosion, anti-chloride, anti-aging, etc.
(Crystals formed by the reaction-test of Goodcrete DPS and baking
Characteristics and Functions:
01. Permanent waterproofing, moisture-proofing and anti-seepage;
02. Reinforces the density and hardness of concrete;
03. Reduces dusting, efflorescence, cracking and damage of
04. Self-seals hairline cracks <<0.3mm repeatedly;
05. Resists the corrosion of acid, alkali and chloride;
06. Discourages the growth of bacteria, mold and microorganism;
07. Prolongs the service life of paint and concrete buildings.
08. Not changes the color and structure of the substrate.
10. Non-toxic, absolutely environment friendly.
11. Easy and fast to use, spray, brush or roll evenly on the
12. Rigid waterproofing, doesn’t need screed-coat and protective
13. Inorganic products, anti-UV, permanent functions.
Basement, subway, sewage treatment plant, dam, reservoir, variouspools, dock, green roof, grain depot, warehouse, civil air defense construction, floor’s waterproof layer, etc.
Clean workshop, winery, food factory, grain depot, ancient architectures, etc.
Chemical plant, waste yard, power plant etc.
Reduce freeze/thaw damage
Prolong service life
Bridge and culvert, airport runway, parking lot, tunnel, etc.
Prevent finish coating peel off
Concrete cracks/damage repair;
As primer coating of finish coating, etc.
How to use:
01. Equipment: Broom, respirator, low pressure sprayer (or brush,
roller), gloves, work clothes and boots, etc.
02. Visible cracks≥0.3mm, should be repaired first.
03. Thoroughly clean up the surface, thoroughly remove
contamination, laitance, oil, film and coating toensure the DPS can efficiently penetrate into the surface.
04. The surface should be dry or semi-wet.
05. Shake well before using.
06. Spray the DPS evenly and saturatedly on the clean concrete
surface, the areas become dry too quickly, immediately spray again.
07. Coverage: 3-5 m2/kg(2 times spraying), the higher the substrate
density, the less spraying quantity.
08. Air temperature 5-35℃, surface temperature 2-33℃,relativehumidity10-90% is the best.
09. When the whole surface become semi-wet after the 1sttime spraying, spray DPS for the 2nd time.
10. Avoid the surface suffering from water and rain within 24h
after construction, and after 3-7days, the treated surface can be started following works.
Packing:20KG/ Pail, 220KG/Pail i.e. 5 US Gal/Pail, 55 US Gal/Pail(HDPE